Product Search

  1. Top Deals
  2. Popular Products

Recently Added Products

  • Brownells 11 Chamfer Cutter

    Brownells 11 Chamfer Cutter

    Recommended by Ron Power. The gentler entry angle causes less bullet deformation and gives better accuracy (especially important for "wadcutter" shooters). One size for all calibers from .38 to .45. Mfg: Brownells. No Lathe Needed, No Need To Remove Barrel From Frame

  • Brownells 5 Chamfer Cutter

    Brownells 5 Chamfer Cutter

    Super gentle angle as currently used by Ruger on their .38/.357 DA guns. If you set back a Ruger barrel or just want to duplicate this angle on any other barrel, use this cutter. You CANNOT use 18deg or 11deg cutters on a 5deg throat without exceeding maximum throat diameter or making a compound angle. Mfg: Brownells. No Lathe Needed, No Need To Remove Barrel From Frame

  • Brownells Complete .38-.45 Chamfering Kit

    Brownells Complete .38-.45 Chamfering Kit

    To cover the "whole nine yards" there's the COMPLETE GUNSMITH'S CHAMFERING TOOL KIT. You get two 18deg Chamfer Cutters, two 18deg Brass Laps, the 11deg Brass Lap, the 5deg Brass Lap, the 11deg Chamfer Cutter, the .38 caliber 5deg Chamfer Cutter, all four 90deg Facing Cutters, all four chamfer tool Pilots and, of course, the Handle, Tool Extension Rod, Centering Guide, Breaker Bar, and 3/32" Allen Wrench . . . all in the fitted, plastic, bench box. Mfg: Brownells. Cuts Beautiful Chatter-Free Chamfer To Eliminate Bullet Splatter

  • Brownells .38-.45 Chamfering Kit Parts

    Brownells .38-.45 Chamfering Kit Parts

    Individual Chamfering parts for your .38-.45 Chamfering Kits. Mfg: Brownells.

  • Brownells 1911 Barrel Alignment Block

    Brownells 1911 Barrel Alignment Block

    Milled lug slot holds the barrel square in the slide for precise fitting of the hood to the bolt face slot. Provides a quick visual check for hood fit that eliminates time consuming assembly/disassembly for hood fitting. Fits between the slide rails to prevent barrel twist. Aids lockup and accuracy. May require minor fitting to slide. Mfg: Brownells SPECS:Steel, black oxide finish. 2" (5 cm) long, 3/4" (19mm) wide, 1/2" (12.7cm) high. Instructions included.. Fast, Accurate Hood-To-Slide Fitting On 1911 Autos

  • Brownells .38-.45 Basic Chamfering Kit

    Brownells .38-.45 Basic Chamfering Kit

    The BASIC KIT consists of Handle, Tool Extension Rod, Centering Guide, one 5deg, 11deg or 18deg Chamfer Cutter, a cutter removing Breaker Bar, 3/32" Allen Wrench and the Kit Box. Mfg: Brownells. Cuts Beautiful Chatter-Free Chamfer To Eliminate Bullet Splatter

  • Brownells Can'T Mar? 1911 Auto Bushing Wrench

    Brownells Can'T Mar? 1911 Auto Bushing Wrench

    Every 1911 owner and gun shop needs a wrench to remove the barrel bushing from the 1911 Autos. Ours fits all the calibers and variations; Colt-made (including factory Officers ACP), plus copies. Made from super tough ABS "T" grade polymers, Brownells Can't Mar wrench has more thickness and heft than other synthetic wrenches. It gets out even the most tightly fitted, match-grade bushing WITHOUT scarring or marring the finish of the gun's bushing or slide. Virtually unbreakable, the Can't Mar wrench carries easily in pocket or field kit. Mfg: Brownells SPECS: 5 1/2" (14.0cm) long. 1 1/4" (3.2cm) wide. .187" (4.75mm) thick. Weighs 1 oz. (28.3gm).. Can't Damage Finishes-Virtually Unbreakable- Pocket Sized-Versatile, Double-Ended Design

  • Brownells 1911 Auto Ejection Port Grinding Stones

    Brownells 1911 Auto Ejection Port Grinding Stones

    We kept looking until we finally found these premium quality, smooth cutting stones to give you the ultimate combination of hardness, cutting speed and finish for shaping the ejection port roll-over notch on those tough, 1911 Auto slides. Start with the B51 stone for either the short or long style notch, then finish up with the B42 to bring the long style notch to full depth. Cobalt impregnated aluminum oxide stones cut fast but will not gouge or tear the metal. You get a smooth, ready-to-finish surface that can be polished or bead-blasted. Stones can be reground and reshaped so they last through job after job. Hardened steel shanks are nickel-plated for long life and sta Mfg: Brownells SPECS: Cobalt impregnated aluminum oxide, 120 grit. Includes (2) B51, (2) B42 stones and instructions. 1/8" (3mm) dia. shank.. Long Wearing "Cobalt" Stones For Shaping Hardened Slides

  • Brownells 1911 Lug Fitting Kit

    Brownells 1911 Lug Fitting Kit

    Three essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide Barrel Lug Cutters. Plus, the Slide Pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case. Mfg: Brownells SPECS: Barrel Holder - Steel. Approximately 3.5" (9cm) long .44" (1.1cm) O.D. Barrel Lug Cutter - Carbide. .186" cutter and .195" cutter; includes handle. Slide pusher- steel shaft, plastic handle. 6.5" (16.5cm) long.. Helps You Fit The Standing Lugs On Oversized Barrels

  • Brownells 1911 Magazine Well Filler

    Brownells 1911 Magazine Well Filler

    Fits inside and fills the magazine well to help prevent distortion caused by vise pressure. Mfg: Brownells SPECS: 7075 aircraft aluminum, silver, matte finish. 1911 Auto available Standard (Std) 4" (10.2cm) long and Extended (Ext) 5" (12.7cm) long. Double-Stack models are Extended (Ext) 8" (20cm) long only.. Helps Prevent Expensive Frame Damage